TONE SR-171E / SR-172E Electric Torque Wrench
The SR-171E / SR-172E torque control wrench has an adjustable torque range of 630-1,250 ft-lb. Available accessories include the DTM21, 100mm and 200mm x-holder socket extensions, as well as 7/8″, 1″, 1-1/8″, 1-1/4″, 1-3/8″, and 1-1/2″ bar sockets.
| Fully Tensioned Structural Bolts | Maximum Torque |
| A325 – 7/8″, 1″, 1-1/8″ | 630-1,250 ft-lb. |
| A325M – M22, M24, M27 | 900-1,800 N-m |
| A490 – 7/8″, 1″ | |
| A325M – M22, M24 |
Want to talk to a specialist now?
(888) 838 6500
Business Hours: 8am - 5pm Est
Specifications
| Model | SR-171E | SR-172E |
| Voltage | 115 V | 220 V |
| Maximum Current | 12.5 A | 6 A |
| Rated Power | 1,200 W | 1,200 W |
| Maximum Torque | 630-1250 ft-lb. | 850-1700 N-m |
| No-load Speed | 6 rpm | 6 rpm |
| Weight | 16.3 lb. | 7.4 kg |
TONE SR-171E / SR-172E Electric Torque Control Wrench Parts
| Part # | Description | Qty |
| 1 | BAR SOCKET | 1 |
| 2 | BAR SKT WARNING LABEL | 1 |
| 3 | T-TORX SCREW M4X10 | 2 |
| 4 | SPIRO STOPPER | 1 |
| 5 | SUB SPIRO STOPPER | 1 |
| 6 | SPIROLOX | 2 |
| 7 | SET SCREW | 2 |
| 8 | OUTER SOCKET HOLDER | 1 |
| 9 | INNER SOCKET HOLDER ASS’Y | 1 |
| 10 | BUSH | 1 |
| 11 | 4TH IDLE GEAR ASS’Y | 1 |
| 12 | 4TH CAGE | 1 |
| 13 | 4TH IDLE GEAR | 5 |
| 14 | NEEDLE CAGE | 10 |
| 15 | 4TH GEAR PIN | 5 |
| 16 | STEEL BALL | 46 |
| STEEL BALL | 4 | |
| 17 | BUSH | 1 |
| 18 | 4TH PINION GEAR | 1 |
| 19 | BUSH | 1 |
| 20 | 3RD IDLE GEAR ASS’Y | 1 |
| 21 | 3RD CAGE | 1 |
| 22 | 3RD IDLE GEAR | 5 |
| 23 | NEEDLE CAGE | 5 |
| 24 | 3RD GEAR PIN | 5 |
| 25 | INTERNAL GEAR | 1 |
| 26 | 3RD PINION GEAR | 1 |
| 27 | BUSH | 1 |
| 28 | 2ND IDLE GEAR ASS’Y | 1 |
| 29 | 2ND CAGE | 1 |
| 30 | 2ND IDLE GEAR | 4 |
| 31 | NEEDLE CAGE | 4 |
| 32 | 2ND GEAR PIN | 4 |
| 33 | 2ND PINION GEAR | 1 |
| 34 | BUSH | 1 |
| 35 | 1ST IDLE GEAR ASS’Y | 1 |
| 36 | 1ST GEAR PIN | 4 |
| 37 | 1ST CAGE | 1 |
| 38 | BEARING | 4 |
| 39 | 1ST IDLE GEAR | 4 |
| 40 | BEARING | 1 |
| 41 | FRICTION DISK | 1 |
| 42 | SPIROLOX | 1 |
| 43 | SPIRO WASHER | 1 |
| 44 | BEARING | 1 |
| 45 | HOUSING | 1 |
| 46 | CRPH SCREW M4X10 | 4 |
| 47 | THRUST WASHER | 1 |
| 48 | BEARING | 2 |
| 49 | STEPPED BUSH | 1 |
| 50 | CIRCLIP | 2 |
| 51 | NEEDLE CAGE | 2 |
| 52 | BEVEL GEAR | 2 |
| 53 | BEARING | 1 |
| 54 | 1ST PINION GEAR | 1 |
| 55 | CHANGE SPOOL | 1 |
| 56 | CIRCLIP | 1 |
| 57 | BEARING | 1 |
| 58 | NEEDLE PIN | 1 |
| 59 | SPOOL GUIDE | 1 |
| 60 | RETAINING RING C-TYPE | 1 |
| 61 | BEARING | 1 |
| 62 | SPOOL HOLDER | 1 |
| 63 | GUIDE PIN | 2 |
| 64 | SPIROLOX | 1 |
| 65 | RETAINING RING C-TYPE | 1 |
| 66 | CHANGE DRUM | 1 |
| 67 | HOUSING COVER | 1 |
| 68 | HSH BOLT M4X12 | 4 |
| 69 | CLICK PLUNGER ASS’Y | 2 |
| 70 | CHANGE GRIP | 1 |
| 71 | PINION BEVEL GEAR | 1 |
| 72 | KEY | 1 |
| 73 | BEARING | 1 |
| 74 | MOTOR GEAR | 1 |
| 75 | RETAINING RING C-TYPE | 1 |
| 76 | BEARING | 1 |
| 77 | HSH BOLT M4X25 | 2 |
| 78 | PROTECTOR | 2 |
| 79 | HSH BOLT M4X30 | 2 |
| 80 | STUD BOLT | 2 |
| 81 | IDLE PIN | 1 |
| 82 | MOTOR IDLE GEAR | 1 |
| 83 | BEARING | 1 |
| 84 | SPIROLOX | 1 |
| 85 | BUSH | 1 |
| 86 | BRACKET | 1 |
| 87 | E-NUT M5 | 2 |
| 88 | HSH BUTTON BOLT M5X12 | 1 |
| 89A | MOTOR ASS’Y 115V | 1 |
| 89B | MOTOR ASS’Y 220V | 1 |
| 90 | RETAINING RING C-TYPE | 1 |
| 91 | BEARING | 1 |
| 92 | BEARING BRACKET | 1 |
| 93A | ARMATURE 115V | 1 |
| 93B | ARMATURE 220V | 1 |
| 94 | CRPH SCREW M4X65 W/ WASHER | 2 |
| 95 | BEARING | 1 |
| 96B | STATOR 115V | 1 |
| 96B | STATOR 220V | 1 |
| 97 | INSULATING WASHER | 2 |
| 98A | STATOR SPIDER ASS’Y 115V | 1 |
| 98B | STATOR SPIDER ASS’Y 220V | 1 |
| 99 | CARBON BRUSH | 2 |
| 100 | BRUSH CAP | 2 |
| 101 | RUBBER PLUG | 1 |
| 102 | WARNING LABEL | 1 |
| 103A | RATING PLATE 115V | 1 |
| 103B | RATING PLATE 220V | 1 |
| 104 | CRPH SCREW M4X6 W/ WASHER | 1 |
| 105 | CUSHION RUBBER | 1 |
| 106 | HSH BOLT M5X35 | 4 |
| 107 | GRIP | 1 |
| 108 | CRPH SCREW M4X35 | 2 |
| 109 | PIN | 1 |
| 110 | SWITCH LEVER | 1 |
| 111 | SPACER | 2 |
| 112 | SET BOARD | 1 |
| 113 | CAVITY HSH SET SCREW M2.6X3 | 2 |
| 114 | DIAL | 1 |
| 115 | SET SPRING | 1 |
| 116 | SPRING WASHER M3 | 2 |
| 117 | CRPH SCREW M3X6 | 2 |
| 118 | TRIGGER SWITCH | 1 |
| 119 | CRPH SCREW M3X14 | 2 |
| 120 | INSULATED CONNECTOR | 4 |
| 121 | GRIP COVER | 1 |
| 122 | CRPH SCREW M4X14 | 7 |
| 123A | GRADUATION LB-FT | 1 |
| 123B | GRADUATION Nm | 2 |
| 124 | CONDENSER | 1 |
| 125A | CONTROL BASE ASS’Y 115V | 1 |
| 125B | CONTROL BASE ASS’Y 220V | 1 |
| 126 | CORD ARMOUR | 1 |
| 127 | CORD ARMOUR WASHER | 1 |
| 128A | CORD ASS’Y 115V | 1 |
| 128B | CORD ASS’Y 220V | 1 |
| 129 | INSULATED TERMINAL | 1 |
| 130 | VOLUME ASS’Y | 1 |
| 132 | 1ST PINION GEAR ASS’Y | 1 |
| 133 | METAL CASE | 1 |
Parts not listed are part of an assembly and are not available separately.
Testimonials
Kind words from our customers:
-
“It was a great pleasure working with GWY. They go above and beyond to help with what we needed. Don was very quick on getting what we needed out to us to complete the job. Very proud to be a GWY customer.”
-
“I have enjoyed working with GWY. Their people know their product well. Their prompt response and delivery of the product is as good as any service Ogeechee Steel has ever had the pleasure of doing business with.”
FAQs
Do you sell tools outside the country?
Yes, we provide tools all over the world.
Is there a warranty on your tools?
1-year manufacturers defect warranty on new tools.
Will this tool fit where I need it to?
We can email a dimensioned drawing, or one is available on our website for reference.
What is the lead time on getting this tool to me?
If we have it in stock, we can send it next day air within the US to get to you tomorrow.
