TONE SR-51E / SR-52E Electric Torque Control Wrench
The SR-51E / SR-52E torque control wrench has an adjustable torque range of 210-370 ft-lb. Available accessories include the DTM5, 100mm x-holder socket extension, as well as 5/8″, 3/4″, 7/8″, and 1″ bar sockets.
| Fully Tensioned Structural Bolts | Maximum Torque |
| A325 – 5/8″, 3/4″ | 210-370 ft-lb. |
| A325M – M16, M20 | 300-500 N-m |
| A490 – 5/8″ | |
| A325M – M16 |
Want to talk to a specialist now?
(888) 838 6500
Business Hours: 8am - 5pm Est
Specifications
| Model | SR-51E | SR-52E |
| Voltage | 115 V | 220 V |
| Maximum Current | 13.5 A | 6.5 A |
| Frequency | 50-60 Hz | 50-60 Hz |
| Rated Power | 1,100 W | 1,100 W |
| Torque Range | 220-370 ft-lb. | 300-500 N-m |
| No-load Speed | 25 rpm | 25 rpm |
| Weight | 11.2 lb. | 5.1 kg |
TONE SR-51E / SR-52E Electric Torque Control Wrench Parts
| Part # | Description | Qty |
| 1 | BAR SOCKET | 1 |
| 2 | BAR SKT WARNING LABEL | 1 |
| 3 | SPIROLOX | 1 |
| 4 | BAYONET LOCK | 1 |
| 5 | SET SCREW | 2 |
| 6 | OUTER SOCKET HOLDER | 1 |
| 7 | BUSH | 1 |
| 8 | INNER SOCKET HOLDER ASS’Y | 1 |
| 9 | HSH REAMER BOLT | 3 |
| 10 | SPIDER | 1 |
| 11 | STEEL BALL | 31 |
| 12 | BUSH | 1 |
| 13 | INTERNAL GEAR | 1 |
| 14 | 3RD GEAR PIN | 3 |
| 15 | NEEDLE CAGE | 6 |
| 16 | 3RD IDLE GEAR | 3 |
| 17 | GEAR CASE | 1 |
| 18 | BUSH | 1 |
| 19 | 3RD PINION GEAR | 1 |
| 20 | THRUST WASHER | 1 |
| 21 | 2ND IDLE GEAR ASS’Y | 1 |
| 22 | 2ND CAGE | 1 |
| 23 | 2ND IDLE GEAR | 3 |
| 24 | NEEDLE CAGE | 3 |
| 25 | 2ND GEAR PIN | 3 |
| 26 | 2ND PINION GEAR | 1 |
| 27 | THRUST WASHER | 2 |
| 28 | 1ST IDLE GEAR ASS’Y | 1 |
| 29 | 1ST GEAR PIN | 3 |
| 30 | 1ST CAGE | 1 |
| 31 | NEEDLE CAGE | 3 |
| 32 | 1ST IDLE GEAR | 3 |
| 33 | METAL SLEEVE | 1 |
| 34 | FRICTION DISK | 1 |
| 35 | METAL SLEEVE | 1 |
| 36 | SPIROLOX | 1 |
| 37 | SPIRO WASHER | 1 |
| 38 | HOUSING | 1 |
| 39 | RETAINING RING C-TYPE | 1 |
| 40 | THRUST WASHER | 1 |
| 41 | METAL SLEEVE | 2 |
| 42 | CIRCLIP | 1 |
| 43 | BUSH | 1 |
| 44 | CIRCLIP | 2 |
| 45 | NEEDLE CAGE | 1 |
| 46 | BEVEL GEAR | 2 |
| 47 | METAL SLEEVE | 1 |
| 48 | STEEL BALL | 4 |
| 49 | 1ST PINION GEAR | 1 |
| 50 | CHANGE SPOOL | 1 |
| 51 | CIRCLIP | 1 |
| 52 | NEEDLE CAGE | 1 |
| 53 | METAL SLEEVE | 1 |
| 54 | NEEDLE PIN | 1 |
| 55 | SPOOL GUIDE | 1 |
| 56 | RETAINING RING C-TYPE | 1 |
| 57 | METAL SLEEVE | 1 |
| 58 | SPOOL HOLDER | 1 |
| 59 | GUIDE PIN | 2 |
| 60 | SPIROLOX | 1 |
| 61 | RETAINING RING C-TYPE | 1 |
| 62 | CHANGE DRUM | 1 |
| 63 | HOUSING COVER | 1 |
| 64 | HSH BOLT M4X12 | 4 |
| 65 | CLICK PLUNGER ASS’Y | 2 |
| 66 | CHANGE GRIP | 1 |
| 67 | PINION BEVEL GEAR | 1 |
| 68 | KEY | 1 |
| 69 | METAL SLEEVE | 1 |
| 70 | MOTOR GEAR | 1 |
| 71 | RETAINING RING C-TYPE | 1 |
| 72 | METAL SLEEVE | 1 |
| 73 | HSH BOLT M4X30 | 2 |
| 74 | IDLE PIN | 1 |
| 75 | MOTOR IDLE GEAR | 1 |
| 76 | METAL SLEEVE | 1 |
| 77 | SPIROLOX | 1 |
| 78 | BUSH | 1 |
| 79 | HSH BOLT M4X20 | 2 |
| 80 | BRACKET | 1 |
| 81 | SPRING WASHER M5 | 2 |
| 82 | HEX BOLT M5X16 | 2 |
| 83 | HSH BOLT M5X12 | 1 |
| 84A | MOTOR ASS’Y 115V | 1 |
| 84B | MOTOR ASS’Y 220V | 1 |
| 85 | RETAINING RING C-TYPE | 1 |
| 86 | METAL SLEEVE | 1 |
| 87 | METAL SLEEVE BRACKET | 1 |
| 88A | ARMATURE 115V | 1 |
| 88B | ARMATURE 220V | 1 |
| 89 | CRPH SCREW M4X65 W/WASHER | 2 |
| 90 | METAL SLEEVE | 1 |
| 91A | STATOR 115V | 1 |
| 91B | STATOR 220V | 1 |
| 92 | INSULATING WASHER | 2 |
| 93A | STATOR SPIDER ASS’Y 115V | 1 |
| 93B | STATOR SPIDER ASS’Y 220V | 1 |
| 94 | CARBON BRUSH | 2 |
| 95 | BRUSH CAP | 2 |
| 96 | RUBBER PLUG | 1 |
| 97 | WARNING LABEL | 1 |
| 98A | RATING PLATE 115V | 1 |
| 98B | RATING PLATE 220V | 1 |
| 99 | CRPH SCREW M4X6 W/WASHER | 1 |
| 100 | CUSHION RUBBER | 1 |
| 101 | HSH BOLT M5X35 | 4 |
| 102 | GRIP | 1 |
| 103 | CRPH SCREW M4X35 | 2 |
| 104 | PIN | 1 |
| 105 | SWITCH LEVER | 1 |
| 106 | SPACER | 2 |
| 107 | SET BOARD | 1 |
| 108 | CAVITY HSH SET SCREW M2.6X3 | 2 |
| 109 | DIAL | 1 |
| 110 | SET SPRING | 1 |
| 111 | SPRING WASHER M3 | 2 |
| 112 | CRPH SCREW M3X6 | 2 |
| 113 | TRIGGER SWITCH | 1 |
| 114 | CRPH SCREW M3X14 | 2 |
| 115 | INSULATED CONNECTOR | 4 |
| 116 | GRIP COVER | 1 |
| 117 | CRPH SCREW M4X14 | 7 |
| 118A | GRADUATION LBF.FT | 1 |
| 118B | GRADUATION N.M | 1 |
| 119 | CORD ARMOUR | 1 |
| 120 | CORD ARMOUR WASHER | 1 |
| 121 | CONDENSER | 1 |
| 122A | CONTROL BASE ASS’Y 115V | 1 |
| 122B | CONTROL BASE ASS’Y 220V | 1 |
| 123A | CORD ASS’Y 115V | 1 |
| 123B | CORD ASS’Y 220V | 1 |
| 124 | INSULATED TERMINAL | 1 |
| 125 | VOLUME ASS’Y | 1 |
| 127 | 1ST PINION GEAR ASS’Y | 1 |
| 128 | METAL CASE | 1 |
Parts not listed are part of an assembly and are not available separately.
Documents
Helpful resources:
Testimonials
Kind words from our customers:
-
“GWY’s parts inventory and response is top notch. You can expect prompt, respectful, knowledgeable answers to questions and full cooperation when you need it. Truly a mark of a reputable company with a good team.”
-
“I have enjoyed working with GWY. Their people know their product well. Their prompt response and delivery of the product is as good as any service Ogeechee Steel has ever had the pleasure of doing business with.”
FAQs
Does the tool come with anything?
All of our tools come with a case. Our Turn-of-Nut & Shear Wrenches come with the one size socket and a metal case. The cordless tools come with one or two batteries, a charger, and a case.
Is there a warranty on your tools?
1-year manufacturers defect warranty on new tools.
What is the lead time on getting this tool to me?
If we have it in stock, we can send it next day air within the US to get to you tomorrow.
Will this tool fit where I need it to?
We can email a dimensioned drawing, or one is available on our website for reference.
