Skip to content

TONE S-60EZA Electric Shear Wrench

The TONE S-60EZA shear wrench is a discontinued model that is lightweight and powerful with a maximum torque of 435 ft-lb. A comparable model to the S-60EZA is the S-61EZ.

Fully Tensioned Structural Bolts Maximum Torque
A325 – 1/2″, 5/8″, 3/4″, 7/8″ 435 ft-lb. (590 N-m)
A325M – M16, M20
A490 – 1/2″ 5/8″, 3/4″
A490M – M16, M20
Talk to a Specialist
Want to talk to a specialist now?
(888) 838 6500
Business Hours: 8am - 5pm Est

Specifications

Model TONE S-60EZA
Voltage 115 V
Maximum Current 13.5 A
Rated Power 1,300 W
Frequency 50-60 Hz
Maximum Torque 435 ft-lb.
No-load Speed 22 rpm
Weight 12.1 lb.

TONE S-60EZA Electric                                              Shear Wrench Parts

Part # Description Qty
1-A OUTER SOCKET 1
1-B INNER SOCKET 1
2 EJECTOR PIN 1
3 EJECTOR SPRING 1
4 INNER SOCKET SPRING 1
5 SPIROLOX 1
6 SPIRO STOPPER 1
7 SPIROLOX 1
8 SET SCREW 2
9 OUTER SOCKET HOLDER 1
10 BUSH 1
11 INNER SOCKET HOLDER ASS’Y 1
12 HSH REAMER BOLT 3
13 3RD SPIDER ASS’Y 1
14 STEEL BALL 34
15 INTERNAL GEAR 1
16 BUSH 1
17 3RD GEAR PIN 3
18 GEAR CASE 1
19 3RD IDLE GEAR 3
20 NEEDLE CAGE 6
21 3RD PINION GEAR 1
22 BUSH 1
23 2ND IDLE GEAR ASS’Y 1
24 2ND CAGE 1
25 2ND IDLE GEAR 3
26 NEEDLE CAGE 6
27 2ND GEAR PIN 3
28 2ND PINION GEAR 1
29 BUSH 1
30 1ST IDLE GEAR ASS’Y 1
31 1ST GEAR PIN 3
32 1ST CAGE 1
33 1ST IDLE GEAR 3
34 NEEDLE CAGE 3
35 BEARING 1
36 FRICTION DISK 1
37 BEARING 2
38 SPIROLOX 1
39 SPIRO WASHER 1
40 HOUSING 1
41 CRFH SCREW M4X14 6
42 1ST PINION GEAR 1
43 BEARING 1
44 EJECTOR BRACKET 1
45 LATCH SPRING 1
46 LATCH 1
47 HOUSING COVER 1
48 HSH BOLT M4X14 4
49 HSH BOLT M4X10 3
50 PINION BEVEL GEAR 1
51 KEY 1
52 BEARING 2
53 MOTOR GEAR 1
54 RETAINING RING C-TYPE 1
55 PUSH ROD 1
56 STUD BOLT 2
57 IDLE PIN 1
58 MOTER IDLE GEAR 1
59 SPIROLOX 1
60 BUSH 1
61 CRPH SCREW M4X20 2
62 BRACKET ASS’Y 1
63 E-NUT M5 2
64 HSH BOLT M5X12 1
65 SPRING PIN 3X12 1
66 EJECTOR LEVER 1
67 CRFH SCREW M4X35 2
68A MOTOR ASS’Y 115V 1
68B MOTOR ASS’Y 220V 1
69 RETAINING RING C-TYPE 1
70 BEARING 1
71 BEARING BRACKET 1
72A ARMATURE 115V 1
72B ARMATURE 220V 1
73 CRPH SCREW M4X65 W/ WASHER 2
74 BEARING 1
75A STATOR 115V 1
75B STATOR 220V 1
76 INSULATING WASHER 2
77A STATOR SPIDER ASS’Y 115V 1
77B STATOR SPIDER ASS’Y 220V 1
78 CARBON BRUSH 2
79 BRUSH CAP 2
80 RUBBER PLUG 1
81 WARNING LABEL 1
82A RATING PLATE 115V 1
82B RATING PLATE 220V 1
83 CUSHION RUBBER 1
84 GRIP 1
85 HSH BOLT M5X35 4
86 CRFH SCREW M4X30 2
88 CRPH SCREW M4X6 W/ WASHER 2
89 WASHER M4 1
90 CRPH SCREW M4X4 1
91 CONDENSER 1
92 INSULATED TERMINAL 3
93 WASHER M3.5 2
94 CRPH SCREW M3.5X6 2
95 INSULATED CONNECTOR 1
96 CORD CLAMP 2
97 CRPH SCREW M4X10 W/ WASHER 2
98 CORD ARMOUR 1
99 CORD ARMOUR WASHER 1
100 GRIP COVER 1
101 CRFH SCREW M4X22 1
102A CORD ASS’Y 115V 1
102B CORD ASS’Y 220V 1
105 METAL CASE 1
200 TRIGGER SWITCH KIT 1

Parts not listed are part of an assembly and are not available separately.

Please note: Model S-61EZ replaced Model S-60EZA in June 2013. While the two tools are nearly identical, certain internal components have changed. If you are not certain which model you own, please call our customer support team for assistance when ordering replacement parts.

Need parts for this product? Fill out our form, and we can help you out. Request parts HERE

Documents

Helpful resources:

Trusted by:

Testimonials

Kind words from our customers:

  • It was a great pleasure working with GWY. They go above and beyond to help with what we needed. Don was very quick on getting what we needed out to us to complete the job. Very proud to be a GWY customer.”

  • I have enjoyed working with GWY. Their people know their product well. Their prompt response and delivery of the product is as good as any service Ogeechee Steel has ever had the pleasure of doing business with.”

FAQs

Because the TN-tool is rotation based, can it do smaller sizes than what it is recommended for?

No, because for the tool to start counting the degrees of rotation, a certain torque must be met.

Are the same size sockets interchangeable between different tools?

Typically, the answer is no but there are exceptions.  The only interchangeable sockets for current model shear wrenches are between the GV-301ZA and the GVC-301EZ. The Older models like the S-60EZA share sockets with their newer models like the S-61EZ. The same is true for the S-90EZ and GS-91EZ as well as the S-110EZ and the GS-111EZ. There are a few TN tools that share sockets with each other such as the TN-20EZ and the TN-22EZ as well as the TN-30EZ and the TN-33EZ. The GNR series can share sockets with some of the TN tools. The GNR-31E, 51E, & 81E can use the TN-20EZ/22EZ bar sockets instead of impact sockets. The GNR-121E can use the bar sockets of the TN-24EZA and the GNR-211E can use the bar sockets of the TN-30EZ/33EZ. The GNR’s can also share impact sockets that have their correct drive size.