Do you bill by the month for rentals?
We typically bill by the week but we’re working on a monthly option.
High Torque Output by Hand. Tighten bolts with minimal effort, even in the most confined of environments. Our torque multiplier features include:
Kind words from our customers:
“It was a great pleasure working with GWY. They go above and beyond to help with what we needed. Don was very quick on getting what we needed out to us to complete the job. Very proud to be a GWY customer.”
“I have enjoyed working with GWY. Their people know their product well. Their prompt response and delivery of the product is as good as any service Ogeechee Steel has ever had the pleasure of doing business with.”
“From choosing the right equipment for each job’s unique requirements to problem solving in the field, GWY is always willing to go out of the way to find a solution. Mix that customer service in with their technical expertise and easy-to-use tools, they really help make bolt up easy.”
“GWY’s parts inventory and response is top notch. You can expect prompt, respectful, knowledgeable answers to questions and full cooperation when you need it. Truly a mark of a reputable company with a good team.”
Your questions, answered.
We typically bill by the week but we’re working on a monthly option.
Yes, we provide tools all over the world.
Typically, the answer is no but there are exceptions. The only interchangeable sockets for current model shear wrenches are between the GV-301ZA and the GVC-301EZ. The Older models like the S-60EZA share sockets with their newer models like the S-61EZ. The same is true for the S-90EZ and GS-91EZ as well as the S-110EZ and the GS-111EZ.
There are a few TN tools that share sockets with each other such as the TN-20EZ and the TN-22EZ as well as the TN-30EZ and the TN-33EZ.
The GNR series can share sockets with some of the TN tools. The GNR-31E, 51E, & 81E can use the TN-20EZ/22EZ bar sockets instead of impact sockets. The GNR-121E can use the bar sockets of the TN-24EZA and the GNR-211E can use the bar sockets of the TN-30EZ/33EZ. The GNR’s can also share impact sockets that have their correct drive size.
We do have some used tools for sale but the selection of used is limited.
Verify everything is back in the case and send it back to GWY at 217 Forest Rd., Greenfield, NH 03047 in the preferred method of your choice.
This can happen for several reasons. It could be that your inner socket is worn and is not functioning properly. It could be a worn ejector spring or ejector pin. If you are installing galvanized bolts you may need an oversized inner socket to fix this problem. It could be that the latch and ejector system inside the tool is worn.
1-year manufacturers defect warranty on new tools.
When we receive the tools, we typically have a one to two day turnaround time before shipping back to the customer.